Plastering is a task that needs a lot of attention to detail, which is why you need to use the correct materials. Luckily, plastering a wall is not hard, but it requires practice. If you’ve not plastered before, you should consider using a professional. You can do small projects on your own, but if you have a big job in mind, you’ll need help. Find out more about a Plasterer Gloucester by visiting Pure Plasterers, a top Plasterer Gloucester service.
The most important thing to do before starting is to prepare the surface. This means you must remove old grit and dirt from the wall. It is also essential to ensure the concrete surface is clean and free of contaminants. You will need to leave no gaps, cracks, or holes. In addition, you will need to cover up any joints between the plasterboards.
Once the surface is ready, you will need to mix the plaster. You will need to use a hawk board, a float, and a mixing stick. While working on the wall, you will need to keep your tools clean and dry. Using a wet sponge or a wide paintbrush will help you do this.
Next, you will want to use a trowel to apply the plaster to the wall. Ensure the trowel is at the correct angle to pick up the plaster. As you move, you should flatten the end of the trowel to be more effective.
After applying the plaster, you will need to sand the walls. Sanding is an essential part of the plastering process because it allows you to smooth out the plaster to achieve a more even finish. When you are finished, you should use a heavy-bristled brush to sand the edges of the plaster to make them smoother. Alternatively, you can use a sponge to rub the corners.
Finally, you will need to apply a second coat of plaster. Depending on the type of plaster you are using, you will need to apply the appropriate amount of water. Generally, you should leave about 2 mm of plaster between the first and second coats.
Many plaster types are available, and multi-finish plaster is a popular choice. Alternatively, you can use a texture / joint compound. However, if you’re planning to paint or tile the wall, you will need to use a primer before you start.
Another trick to remember is to use the plaster sparingly with enough water. Overmixing can result in a lumpy plaster that is difficult to work with.